Artfully RC - Body shell reinforcement set

Everybody knows it. The extensive bashing session in the field takes its toll.

Body broken, or complete parts broken off. A look at the spare parts shop brings the sad truth to light. A new body costs €20-25 in the entry-level segment and €50-60 or up to €120 in the middle to upper price segment.

Therefore, it is clear that you would like to extend the shelf life a little.

And we have the practical upgrade kit for your RC bodies at the start. Whether the new body should be reinforced right before the first drive or when the first cracks are already there. With our kit you extend the service life many times over.

The Artfully-RC glue in the practical 110ml tube together with the heavy (75g/sqm) self-adhesive grid tape are indispensable tools to make your bodywork more stable or to repair it without stiffening it to the maximum.

Each set also includes 2 plastic spatulas (two different sizes) as well as a piece of abrasive fleece and 5 cleaning cloths in order to optimally and gently prepare the inner surface for the application of the grid tape and the adhesive and thus achieve an optimal result.

P roperties:

Mesh tape self-adhesive

• 75gr/sqm grid tape,
  
• self-adhesive,
  
• blue 48mm x 45m roll
  

plastic glue

• 110ml
  
• clear
  
• medium viscosity
  
• Surface drying: 10-15min
  
• complete drying: approx. 24h+
  

Set content:

1 piece of grid tape, self-adhesive, 45m roll

2 pieces of glue B7000, 110ml tube

5 pieces of plastic spatula

1 piece of abrasive fleece, 10cm x 10cm, 1000 grit

5 cleaning/degreasing wipes (individually wrapped)

The set is sufficient for 3-4 bodies in the 1/10 and 1/8 scale range and comes with short, simple step-by-step instructions.

DANGER:
Depending on the paint used for coloring the body shell (water based colorspray) it can react and become discolored due to the solvent contained in the adhesive. Therefore, please test the adhesive on a small area before using it over the entire surface. Such discolouration rarely occurs on bodies that have already been painted (white top coat on the inside). But again, we recommend testing the adhesive on an inconspicuous area.